© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
rights reserved.
rights reserved.
Revision: B
Revision: B
Document ID: 615023
Document ID: 615023
221 (244)
221 (244)
Max steering angle limit fine
Max steering angle limit fine
1ST ANGLE FINE
1ST ANGLE FINE
This parameter defines the fine adjustment for "Max
This parameter defines the fine adjustment for "Max
steering angle limit coarse".
steering angle limit coarse".
PBV20N2
PBV20N2
Service
Service Manual
Manual
PARAMETER
DESCRIPTION
PARAMETER
DESCRIPTION
Min steering angle limit coarse
Min steering angle limit coarse
2ND ANGLE COARSE
2ND ANGLE COARSE
This parameter defines the steering angle limitation.
This parameter defines the steering angle limitation.
It sets the tiller angle
It sets the tiller angle on which the minimum steered
on which the minimum steered
wheel angle is achieved.
wheel angle is achieved.
Min steering angle limit fine
Min steering angle limit fine
2ND ANGLE FINE
2ND ANGLE FINE
This parameter defines the fine adjustment for "Min
This parameter defines the fine adjustment for "Min
steering angle limit coarse".
steering angle limit coarse".
Steering angle cutback
Steering angle cutback
AUX FUNCTION
AUX FUNCTION 3
3
This parameter defines the steering angle reduction
This parameter defines the steering angle reduction
in respect to the truck speed. The
in respect to the truck speed. The controller limits
controller limits
the maximum steering angle depending on the
the maximum steering angle depending on the
truck’s travel speed. It
truck’s travel speed. It is strongly recommended that
is strongly recommended that
you do not touch this setting.
you do not touch this setting.
Value range:
Value range:
•
•
0: Maximum steered angle at full speed is
0: Maximum steered angle at full speed is 73%
73%
•
•
9: Maximum steered angle at full speed is
9: Maximum steered angle at full speed is 10%
10%
Steering angle cutback start speed
Steering angle cutback start speed
AUX FUNCTION
AUX FUNCTION 2
2
This parameter defines the steering angle reduction
This parameter defines the steering angle reduction
ramp starting speed. It
ramp starting speed. It is strongly recommended
is strongly recommended
that you do not touch this setting.
that you do not touch this setting.
Value range:
Value range:
•
•
0: Maximum angle starts to reduce when the
0: Maximum angle starts to reduce when the
truck speed is 1% of the maximum speed
truck speed is 1% of the maximum speed
•
•
9: Maximum angle starts to reduce when the
9: Maximum angle starts to reduce when the
truck speed is 100% of the maximum speed (=
truck speed is 100% of the maximum speed (=
no angle reduction)
no angle reduction)
Straight ahead steering numbness
Straight ahead steering numbness
NUMBNESS
NUMBNESS
This parameter reduces the steering
This parameter reduces the steering sensitivity
sensitivity
close to the straight-ahead direction.
close to the straight-ahead direction.
Value range:
Value range:
•
•
0: No reduction
0: No reduction
•
•
9: Maximum reduction
9: Maximum reduction
Table 13. Submenu: set options
Table 13. Submenu: set options
PARAMETER
DESCRIPTION
PARAMETER
DESCRIPTION
Disable slave CPU
Disable slave CPU
MICRO CHECK
MICRO CHECK
This parameter is for debug functionality. It
This parameter is for debug functionality. It disables
disables
slave CPU functions and allows the system to run
slave CPU functions and allows the system to run
only with main CPU. Safety contacts will remain
only with main CPU. Safety contacts will remain
open, and therefore traction shall stay disabled.
open, and therefore traction shall stay disabled.
Value range:
Value range:
•
•
1: Slave CPU functions present
1: Slave CPU functions present
•
•
0: Slave CPU disabled
0: Slave CPU disabled
Limit steering angle
Limit steering angle
LIMIT DEVICE
LIMIT DEVICE
This parameter limits the
This parameter limits the maximum steering angle.
maximum steering angle.
The maximum angles are set by the parameters
The maximum angles are set by the parameters
https://www.forkliftpdfmanuals.com/
