© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
rights reserved.
rights reserved.
Revision: B
Revision: B
Document ID: 615023
Document ID: 615023
45 (244)
45 (244)
PBV20N2
PBV20N2
Service
Service Manual
Manual
CAUTION
CAUTION
After removing the rubber absorbers, beware of sharp edges when
After removing the rubber absorbers, beware of sharp edges when removing the
removing the
operator’s platform.
operator’s platform.
When installing the rubber absorbers, remember to use locking glue
When installing the rubber absorbers, remember to use locking glue (for example,
(for example,
Loctite 243).
Loctite 243).
After the rubbe
After the rubber absorbers have
r absorbers have been remo
been removed, you can
ved, you can remove the o
remove the operator’s
perator’s
platform:
platform:
1.
1.
Remove the two screws under the
Remove the two screws under the
operator’s platform.
operator’s platform.
2.
2.
Remove the operator’s platform.
Remove the operator’s platform.
CAUTION
CAUTION
When removing the operator’s platform, note that it weights 35
When removing the operator’s platform, note that it weights 35 kg.
kg.
NOTE: When installing the operator’
NOTE: When installing the operator’s platform, place a support, such as
s platform, place a support, such as a block or
a block or
similar, between the operator’s platform and the mounting bracket to prevent the
similar, between the operator’s platform and the mounting bracket to prevent the
operator’s platform from lifting too much. See
operator’s platform from lifting too much. See Figure 29
Figure 29 below.
below.
https://www.forkliftpdfmanuals.com/
