Mitsubishi Fuso FK 2008, Owner'S Manual

Page: 87 / 355

5-40
Switches and controls
4. The idling speed of the engine returns to the
original idling speed (approx. 600 rpm) and the
indicator lamp goes out. This indicates
completion of the manual DPF regeneration.
5. Once the manual DPF regeneration is com-
pleted, you may drive the vehicle normally.
6. If you need to suspend the manual DPF regen-
eration before completion of the sequence,
repress the “ON” side of the DPF cleaning
switch or depress the accelerator pedal or clutch
pedal (manual transmission vehicle).
NOTE:
When you deliberately suspend the manual DPF
regeneration, complete the remaining part of the
sequence without delay by performing the above
steps again.
4 If the red warning lamp is illumi
-
nated
The red warning lamp will be illuminated if you
continue to drive with the indicator lamp quickly
flashing. A red color warning lamp that remains
illuminated while driving probably indicates a
blocked DPF and/or failure of the system. Park the
vehicle in a safe place as soon as possible and pro-
ceed to the following.
1. Hold the starter switch in the “ACC” or “LOCK”
position for more than 5 seconds, then restart
the engine.
2. If the warning lamp goes out, there is nothing
abnormal with the system.
3. If the warning lamp remains illuminated, have an
authorized dealer perform the necessary
inspection.
Z17500
FKFM.book Page 40 Wednesday, June 6, 2007 11:43 AM