Mitsubishi Fuso FK 2008, Owner'S Manual

Page: 32 / 355

3-9
•
Attach the battery with the “+” mark facing
upward.
•
Do not use a metal tool such as tweezers to
replace the battery. Doing so could cause a
short circuit.
•
Dispose of used batteries in accordance with
local regulations. Inconsiderate disposal
could adversely affect the environment. For
disposal, wrap the battery with tape, vinyl
sheet, etc. for insulation so that the battery
cannot contact other metal objects or be
exposed to water.
•
Do not expose the inside of the remote con-
trol switch to water, and keep it away from
dirt and dust. Otherwise, the switch could
fail.
1. Use a crosshead screwdriver to turn the
screw and remove the cover . If the cover is
difficult to open, insert a flat-blade screwdriver
into the slot to pry the cover open.
2. Remove the battery holder from the cover.
3. Put a new battery in the battery holder with the
“+” mark on the battery facing up. Then install
the battery holder in the cover with the “+” mark
on the battery facing against the “+” mark on the
cover.
4. Fit the cover on the remote control switch and
fasten it with the screw.
5. Operate the remote control switch and check
that it works correctly.
Designated Battery Quantity
Lithium Battery CR2032 1
Z13660
Z17228
FKFM.book Page 9 Wednesday, June 6, 2007 11:43 AM