Mitsubishi Fuso FK 2008 Owner'S Manual Download

Page: 167 / 355

12-16

Simple inspection and service

Damage to tires

Check the tires for tread groove depth, for-

eign objects in tread, cracks and uneven

wear.

P. 12-65

Tire inflation pressure

Check that all tires are properly inflated.

P. 12-63

Broken suspension springs

Check for broken springs and tilt of vehicle

body toward either side.

Check also U-bolts and nuts for looseness.

Reflector condition

Make sure that the reflectors are clean, not

damaged, and securely installed.

FKFM.book Page 16 Wednesday, June 6, 2007 11:43 AM

Summary of Contents for Fuso FK 2008




































































































































































































































































































































































Search results

Summary of Contents for Fuso FK 2008

Reviews:

Related manuals for Fuso FK 2008

Brands by name

Popular brands

Mitsubishi Fuso FK 2008, Owner'S Manual

Search results

Summary of Contents for Fuso FK 2008

Reviews:

Related manuals for Fuso FK 2008

Brands by name

Popular brands