Mitsubishi Fuso FK 2008, Owner'S Manual

Page: 256 / 355

13-17
CAUTION
Use only a genuine fuse of the specified amper-
age.
Whenever replacing a lamp, be sure to place the
starter switch in the “LOCK” position and all other
switches in the “OFF” position.
CAUTION
•
Do not directly touch the glass part of a halo-
gen bulb with your fingers. Any oil and other
substances contaminating the glass surface
could shorten the bulb’s service life.
•
The turn signal lamps have plastic lenses.
Do not clean these lenses with alcohol or
thinner. Also, be careful not to splash clutch
fluid on them when adding it to the clutch
system. Contact with such a substance
could discolor or crack the lenses. If such a
substance gets on a plastic lens, immedi-
ately wipe it off or rinse it off with water.
•
Burnt bulbs should be replaced as soon as
possible.
WARNING
•
Electricity is always present at one end of
the glow relay. To be safe, always discon-
nect the negative cable from the battery
before replacing the fuse.
•
Use genuine fuses of the specified amper-
ages. A fire could result if a fuse of incor-
rect amperage is used.
When a lamp has burned out
WARNING
Use a lamp of the specified voltage and watt-
age shown in the following table. If a wrong
lamp is used, an excess of current flowing
through the wiring could blow a fuse or
cause the wiring to overheat and could pos-
sibly cause a fire.
FKFM.book Page 17 Wednesday, June 6, 2007 11:43 AM