Mitsubishi Fuso FK 2008, Owner'S Manual

Page: 266 / 355

13-27
4. After making sure that there are no air bubbles
in the fuel emerging from the air bleeder plug,
fasten the plug tightly. Operate the priming
pump again several times until you feel an
increase in resistance. Be sure to operate the
pump several times, even if the resistance does
not increase because the fuel is cold.
5. Wipe thoroughly the spilled fuel and then start
the engine.
6. Check for any fuel leakage.
If you are forced to tow the vehicle, take the follow-
ing precautions:
•
Disconnect either the propeller shaft or the rear
axle shaft, whichever is easier. If you disconnect
the rear axle shaft, cover the opening to prevent
oil and grease from escaping.
CAUTION
Before towing an automatic transmission vehi-
cle, disconnect the propeller shaft or rear axle
shaft. Alternatively, tow the vehicle with its rear
wheels off the ground. Towing the vehicle with-
out taking these precautions would damage the
automatic transmission.
•
Before raising the front wheels for towing,
remove the bumper and air scoop to prevent
them from damaging.
•
Attach the towing chain securely to the front
axle.
Bleeder plug
tightening torque
10 ± 2.0 N·m (7.2 ± 1.4 ft.lbs.,
1 ± 0.2 kgf·m)
Towing
Chain
Z12183
FKFM.book Page 27 Wednesday, June 6, 2007 11:43 AM