Mitsubishi Fuso FK 2008, Owner'S Manual

Page: 270 / 355

14-3
2 Recommended lubricants/hydraulic fluids
Be sure to use the specified lubricants.
Parts Category Classification
Viscosity
Atmospheric
temperature
SAE viscosity
number
Engine Engine oil API CJ-4
Below 0
°
C (32
°
F) 10W-30
Above –15
°
C (5
°
F) 15W-40
Above 30 ° C (86 ° F) 40
Manual
transmission
Gear oil
API GL-3
General 80
Warm region 90
API GL-4 Tropical region 90
Engine oil API CC or CC/SF
Long period of high-speed
driving
30 or 40
Automatic
transmission
Automatic
transmission fluid
DEXRON III – –
Rear axel Gear oil API GL-5
Below 40 ° C (104 ° F) 90
Above 40
°
C (104
°
F)
Use oil conforming to GL-
5, SAE140 or SAE85W-
140 if the vehicle is to be
driven under heavy load
conditions as for example
driving up long uphill
grades.
Remember, however, that
this oil is be used only
when the temperature is
above 10
°
C (50
°
F)
140 or 85W-140
Power steering
Automatic
transmission fluid
DEXRON II,
DEXRON III type
– –
Brake, Clutch Brake fluid
SAE J1703,
FMVSS No. 116
(Grade DOT3)
– –
Chassis grease
fittings
Chassis grease
NLGI No. 1
(Li soap) Consis-
tency 310 to 340
(at 25
°
C or 77
°
F)
Dropping point
130
°
C (266
°
F) or
higher
– – Cab rear mount
cushion
Door hinge
Kingpin,
steering shaft,
wheel hub bearing,
propeller shaft,
clutch fork shaft,
clutch shifter
Wheel bearing
grease (Multipur-
pose type grease)
NLGI No. 2
(Li soap) Consis-
tency 265 to 295
(at 25
°
C or 77
°
F)
Dropping point
185
°
C (365
°
F) or
higher
– –
FKFM.book Page 3 Wednesday, June 6, 2007 11:43 AM