Mitsubishi Fuso FK 2008, Owner'S Manual

Page: 30 / 355

3-7
3 Keyless entry system
The keyless entry system allows you to lock/unlock
the doors of the driver’s seat and assistant driver’s
seat by operating the remote-control switch .
CAUTION
•
Do not expose the remote control switch to
water, disassemble it, or apply shock by
dropping it.
•
Do not leave the remote control switch in a
place that is exposed to direct sunlight or
where the temperature rises to 60
°
C/140
°
F or
above. Doing so will shorten the life or cause
failure of the remote control switch.
•
Do not remove the cover from the remote
control switch unless you replace the bat-
tery. Removing it for no reason could lead to
a remote control switch malfunction.
4 How to operate the remote control
switch
•
Point the remote control switch toward the cen-
ter of the cabin.
•
Operate the remote control switch within 3 m
(9.8 ft.) from the center of the cabin.
•
Press the “LOCK” button to lock all doors.
•
Press the “UNLOCK” button once to unlock
the driver’s door. You can unlock the assistant
driver’s door if you press the “UNLOCK” button
one more time within 3 seconds.
NOTE:
The assistant driver’s door does not unlock if you
press the “UNLOCK” button more than 3 seconds
after unlocking the driver’s door.
•
When you press the buttons, be sure to press
them for at least one second. If a button does
not work after one press, press the button again
after one or two seconds.
•
After locking the doors with the remote control
switch, always check that the doors are locked
by lifting the outside handle of a door.
•
You cannot lock the doors using the lock knob at
the driver’s seat if the starter key is inserted in
the starter switch.
Z17226
FKFM.book Page 7 Wednesday, June 6, 2007 11:43 AM