Mitsubishi Fuso FK 2008, Owner'S Manual

Page: 184 / 355

12-33
3. Install the inspection plug.
4.2 Replacement
NOTE:
Oil removal is quicker if performed not so long after
the vehicle has been stopped and while the oil is
still warm.
1. Remove the inspection plug and drain plug to
let the oil flow out.
2. After the oil has flown out completely, install
drain plug .
3. Add oil through the inspection plug hole until it
reaches the bottom of the hole.
4. Install the inspection plug.
5 Brake fluid and clutch fluid
Have the brake and clutch fluid replacement per-
formed by an authorized dealer.
Inspection plug
tightening torque
98 to 115 N·m (72 to 87 ft.lbs.,
10 to 12 kgf·m)
WARNING
The gear oil is extremely hot immediately
after the vehicle has been operated. Take
care to avoid being scalded when draining
hot oil. Give the oil time to cool before drain-
ing it.
Drain plug
tightening torque
98 to 115 N·m (72 to 87 ft.lbs.,
10 to 12 kgf·m)
Inspection plug
tightening torque
98 to 115 N·m (72 to 87 ft.lbs.,
10 to 12 kgf·m)
Fluid
Inspection
intervals
Replacement
intervals
Brake
fluid
At the time of pre-
operational check
and every 10,000
km (6,000 miles)
Every 60,000km
(36,000 miles) or
every 12 months
Clutch
fluid
At the time of pre-
operational check
and every 10,000
km (6,000 miles)
Every 60,000 km
(36,000 miles) or
every 12 months
FKFM.book Page 33 Wednesday, June 6, 2007 11:43 AM