Mitsubishi MOTORS Lancer 2004, Workshop Manual

Page: 259 / 638

TRUNK LID
BODY
42-41
REMOVAL SERVICE POINT
<<A>> DOOR OUTER OPENING
WEATHERSTRIP REMOVAL Make a fabricated tool as shown in the illustration to
remove the door weatherstrip.
INSTALLATION SERVICE POINT
>>A<< DOOR OUTER OPENING
WEATHERSTRIP INSTALLATION
The clip colour identifies the left and right
weatherstrips so be sure to use the colours so as to
install correctly.
TRUNK LID
SPECIAL TOOL
M1421000600245
ON-VEHICLE SERVICE
TRUNK LID ADJUSTMENT
M1421001000042
1. If the clearance around the trunk lid panel
assembly is not uniform and locking and
unlocking of the trunk lid is difficult, make
adjustments to the trunk lid bumpers (refer to
P.42-42 ) and trunk lid hinges (refer to P.42-42 ).
2. If the clearance around the trunk lid panel
assembly is uniform, but locking and unlocking of
the trunk lid is difficult, make adjustments to the
trunk lid bumpers (refer to
P.42-42 ) and trunk lid
striker (refer to P.42-42 ).
ACX00555
15 mm
8 mm
AB
4 mm
Thickness:
1 mm
Fabricated
tool
Applicable side Identification colour
Right door Pink
Left door Natural (White)
TOOL Number Name Use
MB991244 Torsion bar remover and
installer Removal and installation of
trunk lid torsion bar
MB991244
AC202324
AC202325
AC202913
A
A
A
A
AB
Section A – A
Trunk lid panel assembly
Side outer panel
Trunk lid panel
assembly
Side outer panel