Mitsubishi MOTORS Lancer 2004, Workshop Manual

Page: 108 / 638

POWER STEERING GEAR BOX AND LINKAGE
POWER STEERING 37-24
POWER STEERING GEAR BOX AND LINKAGE
REMOVAL AND INSTALLATION
M1372010900237
WARNING
Before removing the steering gear, refer to GROUP 52B, Service Precautions ( P.52B-5 ) and
Air Bag Module and Clock Spring ( P.52B-210 ). Centre the front wheels. Failure to do so may
damage the SRS clock spring and render the SRS system inoperative, risking serious injury.
Pre-removal Operation
•
Power Steering Fluid Draining (Refer to P.37-13 .)
Post-installation Operation
•
Check the dust cover for cracks or damage by pushing it
with your finger.
•
Power Steering Fluid Supplying (Refer to P.37-13 .)
•
Power Steering Fluid Line Bleeding (Refer to P.37-13 .)
•
Checking Steering Wheel Position with Wheels Straight
Ahead.
•
Front Wheel Alignment Adjustment (Refer to GROUP 33,
On-vehicle Service
−
Front Wheel Alignment Check and
Adjustment P.33-5 .)
AC304920 AB
57 ± 7 N · m
15 ± 3 N · m
70 ± 10 N · m
7
3
8
5
6
9
10
2
4
1
12 ± 2 N · m
12 ± 2 N · m
<L.H. drive vehicles>
Removal steps
1. Crossmember (Refer to GROUP 32,
Crossmember P.32-8 ).
•
Engine rear roll stopper bracket (Refer
to GROUP 32, Engine Roll Stopper
and Centermember
P.32-7 ).
>>A<<
2. Joint cover grommet
3. Return hose
4. Return tube
5. O-ring
6. Return tube
7. Eye bolt
8. Pressure hose assembly
9. Clamp
10. Steering gear and linkage
Removal steps (Continued)