Mitsubishi MOTORS Lancer 2004, Workshop Manual

Page: 41 / 638

EXHAUST MANIFOLD
INTAKE AND EXHAUST
15-7
INSPECTION
M1151003100616
Check the following points; replace the part if a
problem is found.
Inlet Manifold Check
1. Check for damage or cracking of any part.
2. Clogging of the negative pressure (vacuum) outlet
port, or clogging of the exhaust gas recirculation
passages.
3. Using a straight edge and feeler gauge, check for
distortion of the cylinder head installation surface.
Standard value: 0.15 mm or less
Limit: 0.20 mm
EXHAUST MANIFOLD
REMOVAL AND INSTALLATION <4G1>
M1151003300568
8. Battery wiring harness clamp
9. Inlet manifold stay
10. Inlet manifold
11. Inlet manifold gasket
12. Emission vacuum hose & pipe and
emission solenoid valve assembly
13. EGR valve
14. EGR valve gasket
Removal steps (Continued)
AC303662
50 ± 10 N · m
24 ± 4 N · m
35 ± 6 N · m
17 ± 2 N · m
29 ± 3 N · m
N
3
7
1
2
4
N
6
8
44 ± 5 N · m
AB
9
5
N
29 ± 3 N · m
29 ± 3 N · m
29 ± 3 N · m
(Engine oil)