Mitsubishi MOTORS Lancer 2004, Workshop Manual

Page: 264 / 638

TAILGATE
BODY 42-46
TAILGATE
SERVICE SPECIFICATIONS
M1421000300288
SEALANTS
M1424000500098
SPECIAL TOOL
M1424000600170
TROUBLESHOOTING
M1424000700207
The tailgate system is controlled by the Smart Wiring
System (SWS). For troubleshooting, refer to GROUP
54B, Troubleshooting
P.54B-17 or GROUP 54C,
Troubleshooting P.54C-4 .
ON-VEHICLE SERVICE
TAILGATE FIT ADJUSTMENT
M1424000900137
1. If the striker and latch mesh badly, replace the
striker and striker installation blots with
replacement parts (striker: MR523105, striker
installation blot: MU000474).
2. Move the replaced striker forward and backward
or to the left and right to adjust, after bolt the
striker temporarily.
3. After adjusting, tighten the bolts to the specified
torque [24
±
4 N
⋅
m].
Item Standard value
Tailgate handle play 2.3 to 5.9 mm
Item Specified sealant
Tailgate waterproof film 3M ATD Part No.8633 or equivalent
Tailgate hinge 3M ATD Part No.8531 Heavy drip check sealer, 3M
ATD Part No.8646 Automotive joint and seam sealer
or equivalent
Tool Number Name Use
MB991223
A: MB991219
B: MB991220
C: MB991221
D: MB991222 Harness set
A: Test harness
B: LED harness
C: LED harness
adapter
D: Probe Terminal voltage measurement
A: For checking connector pin
contact pressure
B: For checking power supply
circuit
C: For checking power supply
circuit
D: For connecting a locally
sourced tester
MB991223
A
D
C
B
AD
AC203659