Mitsubishi MOTORS Lancer 2004, Workshop Manual

Page: 196 / 638

GENERAL INFORMATION
FRONT AXLE 26-2
GENERAL INFORMATION
M1261000100347
The front axle consists of front hubs, knuckles, wheel
bearings and driveshafts, and has the following
features:
•
The wheel bearing is a double-row angular
contact ball bearing which incorporates the oil
seals and is highly resistant to thrust loads.
•
The driveshaft incorporates BJ-TJ type constant
velocity joints with high transmission efficiency for
low vibration and noise.
•
The dynamic damper has been mounted on the
driveshaft to reduce differential gear noise.
•
ABS rotor for detecting the wheel speed is
press-fitted to the BJ.
NOTE: .
•
TJ: Tripod Joint
•
BJ: Birfield Joint
SPECIFICATIONS
CONSTRUCTION DIAGRAM
Item 1.3L, 1.6L 2.0L
Wheel bearing Type Double-row angular contact ball bearing
Bearing (OD x ID) mm 80 x 40 80 x 40
Driveshaft Joint type Outer BJ BJ
Inner TJ TJ
Length (joint to joint)
×
diameter mm
LH 375.9
×
23.2 375.9
×
23.2
RH 699
×
23.2 (1.6L-M/T),
703.2
×
22 (1.3L-M/T,
1.6L-A/T)
700
×
23.2
AC303569
Front hub
Knuckle
Strut assembly
TJ (LH)
Drive shaft (LH)
Dynamic damper
BJ
Wheel bearing
Drive shaft (RH)
TJ (RH)
AB
ABS rotor
Dynamic damper