Mitsubishi MOTORS Lancer 2004, Workshop Manual

Page: 238 / 638

WINDOW GLASS
BODY 42-20
REMOVAL SERVICE POINT
<<A>> QUARTER WINDOW GLASS
REMOVAL
1. Apply cloth tape to protect the quarter window
glass.
2. Use glass adhesive knife to cut away adhesive.
CAUTION
Inserting the adhesive knife too deeply into
windshield adhesive may damage quarter
window glass.
3. Keep the glass adhesive knife at right angles with
body flange (from inside the vehicle), and put the
blade at body flange. Then cut away adhesive
along the body flange.
4. Make mating marks on the quarter window glass
and body.
5. Use special tool glass holder (MB990480) to
remove the quarter window glass.
CAUTION
•
Be careful not to remove more adhesive than
is necessary.
•
Be careful also not to damage the paintwork
on the body surface with the knife. If the
paintwork is damaged, repair the damaged
area with repair paint or anti-rust agent.
6. Use a knife to cut away the remaining adhesive so
that the thickness is within 2 mm around the entire
circumference of the body flange.
7. Finish the flange surfaces so that they are
smooth.
CAUTION
Allow the cleaned area to dry for at least three
minutes. Do not touch any surface that has been
cleaned.
8. When reusing the quarter window glass, remove
the adhesive still adhering to the quarter window
glass, and clean with isopropyl alcohol.
9. Clean the body side in the same way.
AC103600AD
Cloth tape
AC002060
AC301614AB
Glass adhesive knife
AC103605AD
MB990480
ACX00476 AB