Mitsubishi MOTORS Lancer 2004, Workshop Manual

Page: 418 / 638

DOOR MIRROR
EXTERIOR 51-44
Step 14. Measure the voltage at the E-02 door
mirror assembly (LH) connector.
(1) Turn the ignition switch to the ON position.
(2) Rear window defogger switch: ON
(3) Disconnect the connector, and measure at the
wiring harness side.
(4) Voltage between E-02 door mirror assembly
connector terminal No.1 and body earth
OK: System voltage
Q: Is the check result normal?
YES :
Intermittent malfunction (Refer to GROUP
00
−
How to Cope with Intermittent
Malfunction P.00-5 ).
NO :
Go to Step 15.
Step 15. Check the wiring harness between E-02
door mirror assembly (LH) connector terminal
No.1 and C-212 junction block connector
terminal No.3.
•
Check the power supply line for open circuit.
NOTE:
Prior to the wiring harness inspection, check
intermediate connector C-29 <LHD>, C-113 <RHD>
and repair if necessary.
Q: Is the check result normal?
YES :
Intermittent malfunction (Refer to GROUP
00
−
How to Cope with Intermittent
Malfunction P.00-5 ).
NO :
Repair the wiring harness.
AC304818
Connector: E-02
Harness side
AB
AC304828
Connector E-02
(harness side)
AB
AC304818
Connector: E-02
Harness side
AB
AC304913
21
7
16 15 17 18 20 19
1 2 3 4 5 6
23 22 24 25 28 26 27
9 8 10 11 14 12 13
Connector: C-212
Harness side
AB
Junction block (Front view)
AC304820
Connector: C-29
AB