Mitsubishi Electric SW1DNN-WS0ADR-B, Operating Manual

Page: 219 / 322

Chapter 9
216
Logic programming – Function blocks
9.10.3 Information on wiring
If muting functions are to be implemented, possible errors in the wiring have to be
taken into consideration. If certain signal combinations are to be transferred in a
common wire, additional precautions have to be taken in order to ensure that the
respective signals are correct. Suitable measures have to be taken (e.g. protected
wiring) in order to ensure that errors cannot arise through this wiring.
Signal
description
A1 A2 B1 B2 C1 C
onveyor
ESPE O
verride input
Enable output Muting lamp Muting status Ov
erride
re
quire
d
A1
– A B B A A A A A A A C
A2 A – B B A A A A A A A C
B1
B B – A A A A A A A A C
B2 B B A – A A A A A A A C
C1
A A A A – A A A A C C C
Conveyor A A A A A – C A A C C C
ESPE A A A A A C – C A C C C
Override input A A A A A A C – A A C A
A The specified signals may not be installed in a common wire unless protected
wiring is used.
B The specified signals may not be installed in a common wire unless protected
wiring or sequence monitoring is used.
C The specified signals may be installed in a common wire.
– Not applicable
Table 99:
Wiring combinations for
muting and prerequisites