APPX
Appendix 5 Processing Time
85
A
Appendix 5
Processing Time
This section describes the processing time related to the transmission of AnyWireASLINK.
Transmission cycle time
In the transmission cycle time, I/O data of the FX5-ASL-M and all the slave modules is updated.
The following table lists the transmission cycle times of the FX5-ASL-M.
Update timing of I/O data
Input
Unless the FX5-ASL-M receives the same data twice successively, data in the input area is not updated.
A minimum of one-transmission cycle time and a maximum of two-transmission cycle time are required as data response
time.
Therefore, when input data is shorter than two-transmission cycle time, the input data may not be captured depending on the
timing.
To ensure the response, provide an input signal that is longer than two-transmission cycle time.
■
Case of minimum data response time
If no change is detected in input data between two sampling timings, communication in one-transmission cycle time is
possible.
■
Case of maximum data response time
The input data is changed after a sampling, and thus the next sampling will be the first data reception. Time equivalent to two-
transmission cycle time is required.
Output
As the double verification is executed on the slave module side, the time required is the same as that for input, namely a
minimum of one-transmission cycle time and a maximum of two-transmission cycle time.
Transmission
points setting
64 points
(32 input
points/32
output
points)
128 points
(64 input
points/64
output
points)
192 points
(96 input
points/96
output
points)
256 points
(128 input
points/128
output
points)
320 points
(160 input
points/160
output
points)
384 points
(192 input
points/192
output
points)
384 points
(224 input
points/160
output
points)
384 points
(256 input
points/128
output
points)
One-transmission
cycle time
2.4 ms
3.6 ms
4.8 ms
6.0 ms
7.2 ms
8.3 ms
9.5 ms
10.7 ms
(1) Sampling timing
(2) Change of the input data
(3) Update of the input data
(1) Sampling timing
(2) Change of the input data
(3) Update of the input data
(2)
(3)
(1)
(1)
(2)
(3)
(1)
(1)
(1)
Summary of Contents for MELSEC iQ-F FX55-ASL-M
