34
When the ME-4201-NS96 type optional plug-in module is installed, simulated signal output to test the analog
output circuit can be put out.
Operate it according to the following.
The following operation becomes possible when you turn on the power supply while pressing the
DISPLAY
at the
state of power failure.
It is impossible to test without the option module.
5.3 Analog Output Test
Test menu
SET
SET
Set the test menu number to “2”. (Set as shown in the right
display.)
Test menu
In case of test the other output, according to the 5.2 to 5.5,
continue to the test.
When the test is finished, turn off the power supply.
q
Analog output
CH1 test
w
Analog output
CH2 test
+
–
,
+
–
,
+
–
,
SET
e
Analog output
CH3 test
+
–
,
SET
SET
r
Analog output
CH4 test
+
–
,
+
–
,
q
Test the analog output CH1.
When the , is pressed, the display and the analog
output CH1 are changed as following.
+
–
50%output
100%output
0%output
w
Test the analog output CH2.
When the , is pressed, the display and the analog
output CH2 are changed as following.
+
–
50%output
100%output
0%output
e
Test the analog output CH3.
When the , is pressed, the display and the analog
output CH3 are changed as following.
+
–
50%output
100%output
0%output
r
Test the analog output CH4.
When the , is pressed, the display and the analog
output CH4 are changed as following.
+
–
50%output
100%output
0%output
5. Output Adjustment and How to Test
