Mitsubishi Electric ME96NSR, User Manual

Page: 12 / 70

12
4.1 Set-up Diagram
4. Set-up
Phase
wire
Display
pattern
Using VT/
direct input
Direct
voltage
Secondary
voltage
Primary
voltage
Secondary
current
Primary
current
Time constant
for current
demand
Phase
wire
Display
pattern
Using VT/
direct input
Direct
voltage
Secondary
voltage
Primary
voltage
Primary
current
Time constant
for current
demand
CC-Link
station
number
Communication
method
ModBus
address
ModBus
baud rates
ModBus
parity
ModBus
stop bit
CC-Link
baud rates
Communication
module reset
Communication
method
ModBus
address
ModBus
baud rates
ModBus
parity
ModBus
stop bit
CC-Link
baud rates
Communication
module reset
Digital input
reset
Operation mode
Measurement display
Set-up menu “End”
End display
Type of option
display
P-1
P-2
CANCEL display
Example of
set-up mode
Set-up menu 1 Set-up menu 2
Simplified set-up men
u
blink extinction
CC-Link
station
number
Initializing
process
Shift
automatically
(Example)
Example of set value
confirmation mode
For correct measurement, it is necessary to set the primary voltage and the primary current, etc. in the set-up mode.
It can set necessary items, after it shifts from the Operation mode to set-up mode. Items are not set is the initial setting.
In the case of normal use, it can use only by the set-up menu 1 (basic set-up). In the case to use the communication
function, set the set-up menu 2.
Refer to the next page or later for the set-up items.
CAUTION
1. Make sure to set for Direct volt-
age, Secondary voltage, Pri-
mary voltage, Secondary cur-
rent, Primary current.
(Or check the set-up contents.)
A correct measurement cannot
be done if the set-up contents
are wrong.
2. Set for the other set-up contents
when it is necessary.
When it is not done, it operates
with the initial contents (refer
to page 66).