32
When the ME-4201-NS96 type optional plug-in module is installed, it is possible to adjust zero and span of analog output.
(Only CH that sets the analog output can be done. )
Please adjust it only when the matches with the receiving instrument or the output have changed.
In the operation mode, press the
SET
and the
RESET
simultaneously for 2 seconds or more, and the following
operation becomes available.
5. Output Adjustment and How to Test
5.1 Analog Output Adjustment
Set-up menu
DISPLAY
SET
DISPLAY
SET
DISPLAY
SET
SET
Set-up menu
According to the set-up diagram (page 13), save the changed
contents, or continue to the other set-up menu.
20mA
4
Zero adjustment
䉭
mA
INPUT
INPUT
INPUT
20mA
4
Span adjustment
䉭
mA
Single deflection
0
䉭
mA
Double deflection
0
q
Zero Adj. for CH1
w
Span Adj. for CH1
CH2, CH3 and CH4 can be adjusted
the same as above.
q
Set the zero adjustment for CH1.
w
Set the span adjustment for CH1.
+
–
,
+
–
,
+
–
,
+
–
,
Set the set-up menu number to “8”. (Set as shown in the right
display.)
±
50 steps can be set. (about
±
0.3mA )
±
50 steps can be set. (about
±
0.3mA )