Mitsubishi Electric ME96NSR, User Manual

Page: 46 / 70

46
7. Others
7.1 How to Rearrange the Display Pattern (P00)
3
Primary voltage
SET
Back to the
upper stage of
the display 4-1.
DISPLAY SET
DISPLAY SET
DISPLAY SET
SET
(Here after same as the set-up menu 1)
DISPLAY
DISPLAY
5) Set the display of the display 4-2.
By or select “YES” and press .
When not to display the display 2, select “no”
and press .
6) Set the upper stage of the display 4-2 to PF.
By or select “PF” and press .
+ –
SET
+ –
SET
SET
7) Set the middle stage of the display 4-2 to W.
By or select “W” and press . + –
SET
8) Set the lower stage of the display 4-2 to no display.
By or set the unit code of the lower stage
to no display and press .
+ –
SET
9) Set the display 4-3 to no display.
By or select “no” and press . + –
SET
Note: When the display 4-3 is set to no display, the
display 4-4 is also set to no display automatically.
Back to the
upper stage of
the display 4-1.
1. The following measurement item cannot be set by the display pattern P00. Set
them separately in the set-up menu 4 (page 20).
Exported active energy, exported reactive energy, capacitive reactive en-
ergy, inductive reactive energy, harmonic current, harmonic voltage
2. Phase cannot be designated by current, voltage. Press
PHASE
in the operation
mode to change phase.
3. Active energy, and reactive energy cannot be displayed at the upper stage and
the middle stage.
Note