Mitsubishi Electric LGH-100RX5 -E, Manual

Page: 88 / 107

C-88
•
If the remote controller Function Selection mode is entered during timer operation, the timer operation will be cancelled. Set timer operation after
completing the remote controller Function Selection mode.
•
When using two remote controllers, if one remote controller is set to remote controller Function Selection mode,
“ ”
will be displayed in
the other remote controller and its operation will be disabled.
•
Button response may at times be slow due to communication processing; this is not a malfunction.
*
1
For the Lossnay models without those functions, those setting items will be nondisplay.
* 2 Those settings can be disabled depending on the other setting conditions.
*
3
When two remote controllers are used, the settings will be displayed only in the main remote controller.
(Hold down the A button and press
the
C
button for 2 seconds.)
Item 1
Press the
B
button.
Normal display (Display when
the Lossnay unit is not running)
Press the
B
button.
Press the
A
button.
Press the
B
button.
*
3
Function limit
(“FUNCTION
SELECTION”)
Change Language
(“CHANGE LANGUAGE”)
Operation function limit setting (
“
LOCKING FUNCTION
”
)
Press the B button.
*
1
*
2
*
3
24-hour ventilation setting (
“
24HR VENTILATION
”
)
See [1] (1)
See [2] (1)
See [2] (2)
Item 3
(Setting content)
Item 2
Remote Controller Function Selection Mode
See [3] (1)
See [3] (2)
See [3] (3)
Use of clock setting (
“
CLOCK
”
)
Press the B button.
Timer function setting (
“
WEEKLY TIMER
”
)
Contact number setting for error situation (
“
CALL.
”
)
See [4] (1)
See [4] (2)
Display change
(“DISP MODE
SETTING”)
See [5] (1)
See [5] (2)
See [5] (3)
See [5] (4)
See [5] (5)
See [5] (6)
See [5] (7)
See [5] (8)
See [5] (9)
See [6] (1)
See [6] (2)
See [6] (3)
See [6] (4)
Interlock mode setting (
“
INTERLOCK MODE
”
)
Press the B button.
Pulse input setting (
“
INPUT SIGNAL
”
)
Delayed operation settings (
“
DELAY OPERATION
”
)
Exhaust operation settings for air conditioner defrosting (
“
EA SETTING DEFROST”)
(Hold down the
A
button
and press the
C
button for
2 seconds, or
L
button)
NOTE
To return to the normal display,
hold down the
A
button and press
the C button for 2 seconds.
Dot display
The language that is selected
in CHANGE LANGUAGE
mode appears on this display.
English is set in this manual.
Mode selection
(“MODE
SELECTION”)
Press the
A
button.
Press the
B
button.
Installation settings
(“LOSSNAY
FUNCTION”)
Press the
B
button.
Press the
A
button.
Supply fan speed setting (
“
SA SETTING
”
)* 1
Press the
B
button.
Exhaust fan speed setting (
“
EA SETTING
”
)*
1
Power supply / exhaust when operation starts (
“
POWER VENT START
”
)
Subordinate Lossnay settings (
“
SUB
SET
”
)
Power supply ON/OFF/AUTO (
“
RECOVERY SETTING
”
)
Operation monitor output selection (
“
OPERATION MONITOR”)
Exhaust fan speed selection for cold region intermittent operation (
“
EA SETTING INTERMIT
”
)
Night purge setting (
“
NIGHT PURGE”)* 2
Bypass automatic ventilation priority setting (
“
BYPASS SETTING
”
)
Press the
B
button.
Interlocking settings
(“INTERLOCK
SETTING”)
Press the
A
button.
Press the
button. Change Language
(“CHANGE LANGUAGE”)
*
3
Press the
A
button.
Filter cleaning setting (
“
MAINTENANCE SIGN
”
)
Press the B button.
Lossnay cores cleaning setting (
“
MAINTENANCE SIGN
”
)
A
See [4] (3)
Press the E button.
SA (Supply Air) Temperature display setting (
“
TEMPERATURE DISP
”
)
See [4] (4)
Press the B button.
OA (Outdoor Air) Temperature display setting (
“
TEMPERATURE DISP
”
)
See [4] (5)
Press the
B
button.
RA (Room Air) Temperature display setting (
“
TEMPERATURE DISP
”
)
See [4] (6)
Press the
B
button.
Temperature exchange efficiency setting (
“
EXCHANGE EFFICIENCY
”
)