Mitsubishi Electric LGH-100RX5 -E, Manual

Page: 78 / 107

C-78
12. Lossnay Remote Controller (PZ-60DR-E)
12.1 Parts Names
Display Section
Identifies the current
operation
Shows the operating mode, etc.
* Multilanguage display is
supported.
For purposes of this
explanation, all parts of the
display are shown as lit.
During actual operation, only
the relevant items will be lit.
“CENTRAL” indicator
Indicates that operation of the
remote controller has been
prohibited by a main controller.
“INTERLOCKED” indicator
Displayed when the Lossnay
starts off by interlocked Lossnay
unit or external signal.
“Timer Off” indicator
Indicates that the timer is off.
“Night Purge” indicator
Displayed during Night Purge
mode
Day-of-Week
Shows the current day of the week.
TIME/TIMER Display
Shows the current time, unless the simple timer is
set.
If the simple timer is set, shows the time remaining.
“Locked” indicator
Indicates that remote controller
buttons have been locked.
“Clean The Filter and The
Lossnay Core” indicators
Comes on when it is time to clean
the filter and Lossnay core.
Timer indicators
The indicator comes on if the
corresponding timer is set.
“Automatic Fan Speed” indicator
Displayed during automatic fan
speed operation
“Fan Speed Adjustment” indicator
Used to select the fan of either Extra
Low, Low, High, Extra High.
Extra Low Low High Extra High
(Power On indicator)
Indicates that the power is on.
“ERROR CODE” indicator
Displayed together with the
malfunctioning unit (3 digits) and
an error code (4 digits).
Ventilation-tilstande
Indicates the ventilation mode
status.
Heat exchange
By-pass
Automatic
(Heat ex./By-pass)
or
Operation Section
MENU button
(MONITOR/SET button)
BACK button
Back
Ahead
Opening the
door.
ON/OFF button
Fan Speed Adjustment button
button
(<ENTER> button)
Operation lamp
Note:
●
If you press a button for a feature that is not installed at the Lossnay unit, the remote controller will display the “NOT
AVAILABLE” message.
If you are using the remote controller to drive multiple Lossnay units, this message will appear only if the feature is not
present at the main unit.
Switches between “run” and “stop”.
Switches between “Operation” and “24-
hour Ventilation (Extra Low fan speed)”
when 24-hour Ventilation is set.
Function selector
button
Used to select the ventilation
mode from among Heat exchange.
By-pass or automatic.
CLOCK button
On during operation. Flashes
when a malfunction occurs.
Selects Extra low fan speed operation
To next operation number.
Used to select the fan of either Low or
High (Extra High).
Press two times to reset the filter
sign display.
To preceding operation number.
ON/OFF button
(DAY button)
FILTER button
CLEAR button
“Extra Low” fan speed
button (OPERATION button)
OPERATION button