Mitsubishi Electric KD Series, User Manual

Page: 69 / 118

© Mitsubishi Electric Corporation
5-2-4 Initial Setting Select-2
[Function]
Save and read CIS correction data when changing resolution
If changing the resolution, please execute this command
prior to
save white/dark correction data to flash memory in CIS.
When saving correction data if changing the resolution, please
send this command to suitable address (resolution you want to
use) and changing the value (Parameter Data=1:Activate) prior
to execute UserSet_#_Save.
Correction data for 600dpi can be saved in initial setting.
※
Dark/White correction data is hold in this product every
resolution. However saving and reading action from/to flash
memory in CIS is valid only the resolution which is enabled by
this command.
[Remark]
1) Due to all correction data is saved / read, the startup is
slow, therefore it is recommended to set the unused
resolution setting to “Parameter Data=0”.
2) When executing UserSet_#_Save, the correction data
of the resolution set to disable is reset.
3) The setting of this command is also valid after turn off
CIS and correction data is reflected when turn on CIS.
69
Address
Register name R/W Parameter
Data
Function Initial
7248h UserSet_Use_600dpi R/W 0 to 1
Correction data for 600dpi resolution
0: Disable / 1:Enable
1
724Ch UserSet_Use_300dpi R/W 0 to 1
Correction data for 300dpi resolution
0: Disable / 1:Enable
0
7250h UserSet_Use_200dpi R/W 0 to 1
Correction data for 200dpi resolution
0: Disable / 1:Enable
0
7254h UserSet_Use_150dpi R/W 0 to 1
Correction data for 150dpi resolution
0: Disable / 1:Enable
0
5-2 Setting
②
: Initial setting select-2
TM-XJ959A