© Mitsubishi Electric Corporation
5-2-19 Electric Shutter
[Function]
Control exposure period of sensor IC for R, G and B
independently.
ShutterEnd
:
Set end timing of exposure for RGB common
End timing[us]=ShutterEnd
×
35
ShutterWidth_R,G,B
:
Set exposure period of RGB individually
Exposure period[us]= ShutterWidth_R,G,B
×
35
[Remark]
1)This function is supposed to be used when you use an external
illumination (continuous-wave mode) with this product. When you
use illumination(LED) control signal from CIS, illumination(LED)
control function to adjust exposure period is recommended without
using this function.
2)Set the value of “ShutterEnd,ShutterWidth” fulfilling with the
following formula. (When setting Electric shutter ON, you need to
control each exposure period of RGB according to your
application.)
①
Electric shutter ON (ShutterEnable=‘1’)
A
≦
ShutterEnd
≦
Line cycle (usec)
×
35 −6
A=620@600dpi, 358@300dpi, 262@200dpi, 214@150dpi
②
Electric shutter OFF (ShutterEnable=‘0’)
130
≦
ShutterEnd
≦
Line cycle (usec)
×
35 −6
※
When you set the value of “ShutterEnd” is less than “
①
A” or “
②
130”,
some defective images are output.
※
When you set the value of “ShutterEnd” greater than “Line cycle x35-
6”, a sync signal might be ignored and the number of the output line
may not correspond to the line cycle. When you use external trigger
mode, keep a margin between the value of “ShutterEnd” and Line cycle.
3)Set the value of “ShutterWidth_R,G,B” filfilling with the following
formula.
1
≦
ShutterWidth_R,G,B
≦
ShutterEnd −1
4)
Electronic Shutter settings affect sensor outputs. When changing
Electronic Shutter settings, recommend to generate Dark /White
correction data again.
84
Address
Register name
R/W
Parameter
Data
Function
Initial
7030h ShutterEnable
R/W
0 or 1
Set Electric shutter On/Off 0:OFF /1:ON
0
7034h ShutterEnd
R/W 0 to 32765 Set exposure end timing
130
7038h ShutterWidth_R
R/W 1 to 32764 Set Red exposure period
1
703Ch ShutterWidth_G
R/W 1 to 32764 Set Green exposure period
1
7040h ShutterWidth_B
R/W 1 to 32764 Set Blue exposure period
1
Line cycle
External sync signal
(Internal sync signal)
Latency
R pixel
G pixel
B pixel
5-2 Setting
⑰
: Electronic Shutter
TM-XJ959A
Exposure period
Exposure period
ShutterWidth_B
ShutterWidth_G
Exposure period
ShutterWidth_R
Summary of Contents for KD Series
