Mitsubishi Electric KD Series, User Manual

Page: 61 / 118

© Mitsubishi Electric Corporation
61
4-2-1 Status LED
【
Status LED
】
Status LED is located on the back of CIS.
Status LED shows the status of communication status and
CIS.
【
Status of CIS
】
Combination of the 4 status LED shows the status of CIS.
4-2 Status LED
L4(KD6R1064DXL-NL)
L5(KD6R1247DXL-NL)
L6(KD6R1688DXL-NL)
LED status CIS Status
LED off No Power
Green
LED on
Link established,
no stream transfer
Green 0.5 sec.
LED blink
Link established,
transferring stream
Red 0.5 sec.
LED blink
CRC error
Ch1
Ch2
Ch3
Ch4
61
ＬＥＤ状態 ステータス
Ch1
〜
3: Red LED on
Ch4: OFF
FPGA abnormal
temperature of I/F board
Ch1,4: OFF
Ch2,3: Orange LED on
System boot
(FPGA configuration
of I/F board)
Ch1:Orange LED on
Ch2
〜
4: OFF
System boot
(FPGA reset status
of I/F board)
Ch1,2,4: OFF
Ch3:Orange LED on
System boot
(Initialize IF board and
CIS booting)
Ch1
〜
3: OFF
Ch4:Orange LED on
Power supply voltage is not
enough
(Less than 3.4V)
Camera Link® is a registered trademark of AIA (Automated Imaging Association).
TM-XJ959A