Mitsubishi Electric KD Series, User Manual

Page: 92 / 118

© Mitsubishi Electric Corporation
92
Address Register name R/W Parameter
Data
Function
Initial
7004h BaudRateSelect R/W 0 to 2
Switch baud rate of UART communication in Camera Link®
0: 9.6kbps, 1: 19.2kbps, 2: 115.2kbps
0
7008h ContTimeOut R/W 0 to 65535
Setting time of time out for UART communication in Camera Link®
0:Disable, 1:0.2seconds afterwards every 0.2seconds
150
7010h LedSelector R/W 0 to 3
Illumination(
LED) control
0:OFF
1: Upper-stream Illumination(A) ON
2: Down-stream Illumination(B) ON
3: Both Upper-stream (A) and Down-stream (B) ON
3
7014h LedPulseDivision R/W 0 to 3
Set
illumination(
LED) Pulse division
0:OFF, 1: 2 pulses, 2: 4 pulses, 3: 8 pulses
0
7018h LedPulseWidthA R/W 0 to 65535 Upper-stream
illumination(
A) period or pulse width 450
701Ch LedPulseWidthB R/W 0 to 65535 Down-stream
illumination(
B) period or pulse width 450
7020h LedEffectivePeriod R/W 0 to 65535 Set
illumination(
LED) Effective Period 692
7030h ShutterEnable R/W 0 or 1
Set Electric shutter On/Off
0:OFF /1:ON
0
7034h ShutterEnd R/W 0 to 32765 Set exposure end timing 130
7038h ShutterWidth_R R/W 1 to 32764 Set Red exposure period 1
703Ch ShutterWidth_G R/W 1 to 32764 Set Green exposure period 1
7040h ShutterWidth_B R/W 1 to 32764 Set Blue exposure period 1
7050h DarkCorrectionEnable R/W 0 or 1
Set Dark correction On/Off
0:OFF /1:ON
0
7054h DarkCorrectionExecute R/W 1 Generate Dark correction data -
7070h WhiteCorrectionEnable R/W 0 or 1
Set White correction On/Off
0:OFF /1:ON
0
7074h WhiteTarget_R R/W 0 to 4095 Set Red White Correction Target value 4000
7078h WhiteTarget_G R/W 0 to 4095 Set Green White Correction Target value 4000
707Ch WhiteTarget_B R/W 0 to 4095 Set Blue White Correction Target value 4000
Appendix A: Control register list
③
TM-XJ959A
Camera Link® is a trade mark registered by AIA
（
Automated Imaging Association).