Mitsubishi Electric HG-KN, Instruction Manual

Page: 43 / 104

5. WIRING OPTION
5 - 6
No. Product name Model Description Remark
32) Electromagnetic
brake connector
set
MR-BKCNS2 Straight plug: CMV1S-SP2S-L
Socket contact: CMV1-#22BSC-S2-100
(DDK)
HG-SN series
IP67
33) Electromagnetic
brake connector
set
MR-BKCNS2A Angle plug: CMV1S-AP2S-L
Socket contact: CMV1-#22BSC-S2-100
(DDK)
HG-SN series
IP67
34) Encoder
connector set
MR-ENCNS2 IP67
HG-SN series
Refer to section 5.2 (5) for details.
35) Encoder
connector set
MR-ENCNS2A IP67
HG-SN series
Refer to section 5.2 (5) for details.
Note. The cable and the connector set may contain different connectors but still usable.
5.2 Encoder cable/connector sets
POINT
For the CN2 side connector, securely connect the external conductor of the
shielded cable to the ground plate and fix it to the connector shell.
Screw
Cable
Ground plate
Encoder cables are not subject to European Low Voltage Directive (50 V AC to 1000 V AC and 75 V DC to
1500 V DC).
(1) MR-J3ENCBL_M-_-_
These cables are encoder cables for the HG-KN series servo motors. The numbers in the cable length
field of the table indicate the symbol filling the underline "_" in the cable model. The cables of the lengths
with the numbers are available.
Cable model
Cable length
IP rating Bending life Application
2 m 5 m
10 m
MR-J3ENCBL_M-A1-L 2 5 10 IP65 Standard
Load-side lead for HG-KN servo
motor
MR-J3ENCBL_M-A1-H 2 5 10 IP65
Long
bending life
MR-J3ENCBL_M-A2-L 2 5 10 IP65 Standard
Opposite to load-side lead for HG-
KN servo motor
MR-J3ENCBL_M-A2-H 2 5 10 IP65
Long
bending life