- 39 -
(4) Data setting
Make the setting for the BAC-HD150 system and BACnet
®
related items by using Setting Tool.
The following table shows setting items. (Refer to the Instruction Book that came with Setting Tool for setting method.)
When BAC-HD150 is connected to PAC-YG50ECA, the settings of the M-NET address, group, and interlocked operation with
LOSSNAY are made by using AG-150A. It is not necessary to make these settings on BAC-HD150.
No.
Main tab
Sub tab
Setting item
1
System Settings
Basic System
All setting items
2
M-NET
No settings required
3
Expansion Controller
Access Point Settings
4
Group Settings
Group
No settings required
5
LOSSNAY
No settings required
6
BACnet
®
Settings
BACnet
®
All setting items
7
Network and Device
All setting items
8
COV Notification
All setting items
9
Event Notification
All setting items
10
Object
All setting items
11
Other
All setting items
CAUTION
If IP address of BAC-HD150 overlaps any of the addresses that are assigned to other devices, communications
cannot be performed properly via BAC-HD150 or other devices. Check the address before setting.
MEMO :
When settings are changed by using Setting Tool after the initial settings have been completed, it is not necessary
to disconnect the LAN1 cable from BACnet
®
and the LAN2 cable from HUB1.
WT05542X04.book Page 39 Wednesday, July 3, 2013 12:13 PM
