– 95 –
Table Available Function List
*1: At factory shipment, the operation of the building manager is prohibited.
11. Maintenance screen
11-1 Copying the data to a USB memory
To copy the data to a USB drive, plug the USB into a USB port, and touch [Backup] in the screen that appears when [Maintenance] on
the setting change screen is touched.
Function
Content
Initial setting
Date and time
Current date and time setting
Unit Info
*1
AG-150A unit information settings, connection or non-connection of EC
Network
*1
AG-150A network setting, external output setting
Advanced
*1
AG-150A Time Master/Sub setting, Seasonal schedule setting
Groups
Group name
Group name setting
Group structure
*1
Connection setting of indoor units, LOSSNAY units, DIDO controller,
Air To Water (PWFY), remote controllers, and system controllers in a
group
Interlock
*1
Connection setting of interlocked LOSSNAY
Blocks
Block name
Block name setting
Block structure
*1
Registration setting of groups in a block
Floor Layout
Floor name
Floor name setting
Floor configuration
Floor configuration setting
Function 1
Measurement
Setting of AI controller, PI controller
Function 2
Ext Temp Interlock
Setting of outside temperature interlock function
Setback
Setting of setback function
Note:
The table below shows USB memory devices that have been confirmed to work. (As of February 2012)
* Asterisks in the Model column describe colors.
Do not make a security function setting when using No.10, 12, 13, or 14.
If any USB memory above cannot be obtained, use a memory device that meets the following three conditions. Test the memory
device several times before use and verify that the device functions properly.
Reading data from or writing data to a memory device that has not been confirmed to work may cause unexpected problems.
Make sure to test the memory device before operating the unit (during the test run). Do not use a memory device that has
experienced writing error once.
1
USB standard: Verified with USB 1.1
2
Format type: Must be in FAT32 or FAT (FAT16) format
3
Security function is not provided, or not required to set.
No.
Manufacturer
Model
Capacity
No.
Manufacturer
Model
Capacity
1
Sandisk
SDCZ6-2048-J65RB
2G
10
Verbatim
USBM4GVWS1
4G
2
kingston
DT400/2GBFE
2G
11
SILICON POWER
SP002GBUF2M01V1*
2G
3
I/O data
TB-BH2/2G/*
2G
12
ELECOM
MF-NU2A04G**
4G
4
I/O data
TB-BH2/4G/*
4G
13
Transcend
TS2GJFV33
2G
5
BUFFALO
RUF-C2GS-**/U2
2G
14
TDK
UFD4GS-T*A
4G
6
BUFFALO
RUF2-C2GS-**/M
2G
15
BUFFALO
RUF2-K4GE-**
4G
7
BUFFALO
RUF-C4GS-**/U2
4G
8
BUFFALO
RUF-C8GS-**/U2
8G
9
adata
C702
2G
USB port
WT05369X15.book Page 95 Wednesday, November 7, 2012 10:33 AM
