– 36 –
(1-3) Block
(1-4) All groups
To make the settings for a block or blocks, select the block selection
button on the block display screen under the weekly schedule setting
screen by touching it. An orange frame will appear around the icons
that correspond to the selected blocks.
After making the selection, touch the [Edit] button at the right bottom
corner of the screen to bring up the weekly schedule screen.
Block selection button
To make the settings for all groups, touch the Select-all-units button
on the weekly schedule setting screen (floor layout or block display
screen). An orange frame appears around the icons of all groups.
After making the selection, touch the [Edit] button at the right bottom
corner of the screen to bring up the weekly schedule screen.
Select-All-Units button
Equipment type selection screen
If more than one groups exist within a group, such as air conditioning
unit group, ventilation unit (LOSSNAY) group, and Other Equipment
group, a screen to select a group will appear when the “Set” button is
touched.
* “Booster unit” and “Water HEX unit” will appear as “Air To Water
(PWFY).”
Schedule setting method selection screen
After the model names have been selected, a screen will appear
asking if you want to set the schedule by using a new form or by using
the settings for an existing group. To use the existing group settings,
select “Based on the following group settings,” select the group, and
press “OK.”
Selecting “New settings” will bring up a blank form. Selecting “Based
on the following group settings” will bring up the schedule of the
selected group.
WT05369X15.book Page 36 Wednesday, November 7, 2012 10:33 AM
