– 102 –
11-4-2
Power consumption data
The format of the CSV file that is output when the power consumption data is saved is as follows:
Note: Dates in the folder name, the file name,and the file contents are displayed in the format selected on the Unit Info screen.
“March 10, 2010” would be expressed
as [10/03/2010] in the [dd/mm/yyyy] format,
as [03/10/2010] in the [mm/dd/yyyy] format, and
as [2010/03/10] in the [yyyy/mm/dd] format.
[File name]
• Without connection to an Expansion controller
ChargeParameter_[yyyy]-[mm]-[dd]MCPA[PI controller*
1
address (fixed 2 digits)]-[Time zone (1-5)*
2
].csv
(yyyy: year, mm: month, dd: date)
Example) ChargeParameter_2010-03-10MCPA50-3.csv
• With connection to an Expansion controller
ChargeParameter_[yyyy]-[mm]-[dd]MCPA[Expansion Controller Number(1-3)]-[PI controller*
1
address (fixed 2 digits)]-[Time zone
(1-5)*
2
].csv (yyyy: year,mm: month,dd: date)
Example) ChargeParameter_2010-03-10MCPA1-50-3.csv
*
1
PI controller : PAC-YG60MCA
*
2
Time Periods 1 through 5 can only be set from TG-2000A.
When shipped from the factory, only Time Period 1 is settable.
[File contents]
The format of each CSV file is as follows. Each file contains up to 62 days of data.
* Delimiter (“,” or “;”) and decimal point (“.” or “,”) that are used by the CSV file are selected on the Initial Setting Web.
* No. is consisted of three-digit or four-digit number:
Without connection to an Expansion controller : address (two digits) and Time zone (one digit).
With connection to an Expansion controller : number(1-3) , address (two digits) and Time zone (one digit).
* Power consumption data range is 0.00 through 999999.99. If the count value exceeds the maximum value, the count value goes back to 0.00.
* The file is not output until the operation starts because the data does not exist.
* When the Energy Management License Pack or Charge License has not been registered, the file is not output.
* Charge License can be registered only on AG-150A-A.
Example) Without connection to an Expansion controller
Example) With connection to an Expansion controller
Item
Format
1st line
File class
Power consumption: 202
2nd line
Data range
Start date + “-” + End date
3rd line
Target trend
Without connection to an Expansion controller
“MCP”+[ PI controller address]-[Time zone]
With connection to an Expansion controller
“MCP”+[Expansion Controller [ PI controller address]-[Time zone]
4th line
Item
“No., Date, Count value(Ch1), Count value(Ch2), Count value(Ch3) ,Count value(Ch4)”
5th to 66th line
(max.)
Data
no., date, count value(Ch1), count value(Ch2), count value(Ch3) ,count value(Ch4)
* The value for each data type is a cumulative value since the beginning of operation.
202
10/03/2010-12/03/2010
MCP 50-3
No.,Date,Count value(Ch1), Count value(Ch2), Count value(Ch3), Count value(Ch4)
503,2010/03/10,100000.00,0.00,0.00,0.00
503,2010/03/11,100100.00,0.00,0.00,0.00
503,2010/03/12,100250.00,0.00,0.00,0.00
202
10/03/2010-12/03/2010
MCP 1-50-3
No.,Date,Count value(Ch1), Count value(Ch2), Count value(Ch3), Count value(Ch4)
1503,2010/03/10,100000.00,0.00,0.00,0.00
1503,2010/03/11,100100.00,0.00,0.00,0.00
1503,2010/03/12,100250.00,0.00,0.00,0.00
WT05369X15.book Page 102 Wednesday, November 7, 2012 10:33 AM
