– 30 –
* The change on the interlock setting between the indoor and LOSSNAY units made on the indoor unit side will not be reflected on the
LOSSNAY unit side on the screen until the OK is pressed and the change is saved. The actual interlock setting, however, is
immediately effective, so as soon as the interlock setting on the indoor unit side is set to ON, the LOSSNAY unit will go into operation
when one or more indoor units go into operation regardless of the display on the screen.
4
Set Air Direction Set the air flow direction
with the Up/Down
arrows below “Air
Direction” function.
5-directions model
(Swing and Auto are not available on some indoor unit(s). Depending on the indoor
unit four or five air flow directions are available.)
5
Fan speed
Use the Up/Down
arrows below “Fan
Speed” function to set
the fan speed.
4-speed model:
(“Auto” is not available on some indoor units. Some indoor units of units have only
two or three fan speeds.)
6
Prohibiting local
remote controller
operation
Press the button that
corresponds to the
desired function and
setting to permit or
prohibit the operation
from the remote
controller. The functions
that can be prohibited
are: ON/OFF, operation
mode, temperature, and
filter sign reset.
Pressing of each button toggles through the following three options:
Retention of current status
Permit
Prohibit
7
Schedule
Available/Not
Available
Select the Available/Not
Available status for the
schedule settings.
The Available/Not Available status changes with each pressing of the button.
8
Filter sign reset
Press “Reset” under
“Filter Sign”.
Filter cleaning warning sign will be removed. Filter cleaning schedule time is reset.
* Reset the filter sign after cleaning the filter.
9
Ventilation ON/
OFF
Select the ON/OFF
status for the interlocked
unit.
An orange frame will appear around the selected operation status.
0
Ventilation Fan
speed
Set the fan speed with
the Up/Down arrows
below “Fan Speed”.
2-speed model:
(Fan speed setting is not available on some indoor units.)
a
OK
Press the OK button to
reflect the change.
Pressing the OK button saves the setting and takes the screen back to the previous
screen (Floor layout or Block display).
b
Cancel
Press the Cancel button
to cancel the change.
Pressing the Cancel button cancels the change and takes the screen back to the
previous screen (Floor layout or Block display).
Function
Operation method
Display
(Mid 3)
(Mid 2)
(Mid 1)
(Mid 0)
(Horizontal)
(Swing)
(Auto)
(Low)
(Mid 2)
(Mid 1)
(High)
(Auto)
Leave current
status as is
Permit
Prohibit
ON/OFF
Operation mode
Temperature
setting
Filter sign reset
(Low)
(High)
WT05369X15.book Page 30 Wednesday, November 7, 2012 10:33 AM
