– 81 –
8. Function 1
8-1 Measurement Setting
To measure temperature, humidity, or amount of electricity, click [Function 1]-[Measurement] on the menu to access the measurement
settings window, and set the connection settings for AI controller (PAC-YG63MCA) and PI controller (PAC-YG60MCA).
* If expansion controllers (PAC-YG50ECA) are connected, set the settings for each of the systems to which expansion controllers are
connected by specifying the system on the [EC system selection].
* Current measurement values display function and the High/Low alarm function can be used without a license.
* To use the measurement data for energy saving (peak cut) control, the energy saving (peak cut) license must be registered. Make sure
that required licenses have properly been registered on the window for registering the licenses for optional functions (refer to
section 7-4).
* If logged in as a building manager user, certain functions may not be accessible.
* When multiple AG-150A units are connected via expansion controllers, set the measurement settings on only one of the units.
CAUTION
When expansion controllers (PAC-YG50ECA) are connected, make sure that they are properly
connected before setting the measurement settings so that the settings for the expansion controllers will
be properly saved.
Without connection to EC
With connection to EC
WT05369X15.book Page 81 Wednesday, November 7, 2012 10:33 AM
