Mitsubishi Electric AG-150A Instruction Book Download Page 5

Page: 5 / 116

– 4 –

er O

pera

tio

unc

tio

Operation

External input

Connects to an external input/output device that stops the units in an emergency, run or stop the

units, permit or prohibit the operation of units collectively. Requires an external input/output

adapter (sold separately).

Monitor

ON/OFF (system)

The ON/OFF indicator lamp (LED) indicates if one or more groups or all the groups in the system

are stopped. (Not applicable to a general equipment.)

Operation status of each group in

the system

Operation status (ON/OFF), operation mode, fan speed, temperature setting, air flow direction, and

operation status (ON/OFF) of interlocked units are displayed.

Operation status of each group in

the system (HWHP (CAHV))

Operation status (ON/OFF), operation mode, temperature setting, fan mode, and temperature

(Representative, Outdoor, Inlet, Outlet) are displayed.

Operation status of each group in

the system (measurement)

Measurements by the temperature sensor and humidity sensor that are connected to the AI

controller are displayed.

Measurements by the watt-hour meter that is connected to the PI controller are displayed.

Filter sign

Indicates that the filters on the units in a given group is due for cleaning.

Water circuit sign

(Air To Water (PWFY))

Indicates that the circulating water circuit in a given group is due for replacement.

Local operation prohibition

Displays the functions that the controller forbids or the functions that are forbidden by High-level

equipment.

Error

The address of the unit in error, error code, and the address of the unit that detected the error will

appear.

Error history monitor

Up to 384 errors can be stored in memory. (128 errors per AG-150A or Expansion controller (64 unit

errors, 64 communication errors))

External output

Outputs signals (run/stop, error) to an external device. Requires an external input/output adapter

(sold separately).

Initi

al Sett

ings Operation

Date and time

This function is used to set the current date/time and daylight savings time.

License

This function is used to register license.

Unit Info.

This function is used to set unit name, ID number, connection or non-connection of Expansion

controller, brightness of the LCD, sound volume, date format, time format, temperature unit, and

display language, test run availability, screen lock and room temperature availability.

Network

This function is used to set the IP address, subnet mask address, and gateway settings for the LAN

and also to set the address, K-transmission converter address, local control prohibit settings, and

external input settings for the M-NET; and the Expansion controller settings.

Advanced

Allows the Time Master/Sub setting to be made.

Enables/disables the Seasonal schedule settings.

Groups

This function is used to register indoor units, LOSSNAY units , DIDO controller (PAC-YG66DCA),

Air To Water (PWFY), HWHP (CAHV), remote controllers, and lower-level system controllers to a

group.

Blocks

This function is used to register a group to a block.

Interlock

This function is used to interlock the operation of indoor units and LOSSNAY units.

Floor Layout

This function is used to make the basic settings for the floor layout and display position of the

groups.

Measurement

Temperature sensor and humidity sensor settings can be set by connecting an AI controller.

Watt-hour meter and water meter settings can be set by connecting a PI controller.

Monitor

Refrigerant system configuration

confirmation

Allows the user to see which indoor units are connected to each outdoor unit.

Operation

Ext Temp Interlock

Control level of outside temperature interlock function can be set for each group.

Setback

Control time and upper/lower limit temperature can be set for setback function.

User Info

Maintenance User

Allows the maintenance user name and password to be set.

Building Manager

Allows the building manager name, password, function enable/disable settings to be made.

Maintenance

Backup

The setting data (Initial setting and user info) can be copied to a USB memory drive.

Import

The setting data (Initial setting and user info) can be read from a USB memory drive.

CSV output

Up to 62 days of the operational data (charge parameters and power consumption data) can be

stored to a USB memory.

Touch panel calibration

The touch position on the touch panel can be adjusted.

Other

Data

back-up

Connection/Interlock Information

Group setting information and interlock setting information are retained, even if power is turned off.

Error history

Retained, even if power is turned off.

Schedule data

Schedule information of each group is retained, even if power is turned off.

Current time

Current time is retained by the built-in capacitor for a week, even if power is turned off.

(It takes approximately a day to fully charge the built-in capacitor. There is no need to replace the

capacitor.)

Saving the data on a USB drive

The initial setting data, user info, and operational data (charge parameters, power consumption)

can be stored to a USB memory.

Reading data from USB memory

Initial setting data can be read from USB memory.

Device

maintenance

Screen lock function

The screen can be locked to prevent access until a valid user name and password are entered.

Touch panel cleaning

Touch panel is locked and can be cleaned.

Time synchronization

Clocks on the controllers and units that are under the control of the main controller are synchronized

once a day (applicable only to the ones that support this function).

Function

Description

WT05369X15.book Page 4 Wednesday, November 7, 2012 10:33 AM

Summary of Contents for AG-150A





















































































































Search results

Summary of Contents for AG-150A

Reviews:

Related manuals for AG-150A

Brands by name

Popular brands

Mitsubishi Electric AG-150A, Instruction Book

Search results

Summary of Contents for AG-150A

Reviews:

Related manuals for AG-150A

Brands by name

Popular brands