Mitel 600, User Manual

Page: 71 / 97

Device menu
65
Sensibility Allows you to set the sensitivity (low, medium, high).
This allows you to adapt the sensor to the different
movements (e.g. running movement) of the surveillance
personnel:
• Low sensibility means: Slow movements are
enough to reset the delay once again.
• High sensibility means: Only rapid (jolting)
movements will reset the delay.
Switch Vibra call off in the Ringer settings (see “Profiles menu” on page 66 ) if
you wish to use the escape alarm.
Repeat alarm
Use Change to switch the repetition of an alarm on and off
Repeat time
The amount of time after which a new pre-alarm is
made, followed by the dialling of the alarm call number,
for instance because the dialling of the alarm call
number was cancelled (5-240 seconds).
Reset to default
You can reset different areas your settings to the status they had on delivery.
Personal directory You can delete your phone book entries after a
confirmation prompt.
VIP list Deletes the VIP list (see “VIP list (Mitel 610d, 612d)” on
page 31 ).
Inbox/ Text
messages If Text messages are available on your system, you can
delete the Inbox list before you have marked all the
messages as “read”. This is not possible in the Inbox list.
New info Deletes the list with new information.
Jobs
If Text messages are available on your system, your
can delete the Jobs list before you have marked all of
the messages as “read”. This is not possible in the Jobs
list.
All lists
All lists (call lists, redial list) are deleted after a
confirmation prompt.
Key programming
All programmed keys are reset to their factory settings.
User settings
All the user settings (e.g. language, display settings)
are rest to the factory settings after a confirmation
prompt.
All
All settings on the handset are reset to factory settings
after a confirmation prompt. The registration of the
handset on the system and the PIN are not affected.