Mitel 600 Series DECT Phone User Guide
34
Escape alarm
The escape alarm is triggered if the sensor detects violent DECT phone movements for
user-definable period of time. As with the No movement alarm, the sensor has three sensitivity
settings. To guarantee a reliable operation it is advisable to test the sensitivity of the escape
alarm with the person to be monitored.
There is a setting for each alarm type to activate / deactivate the sensor supervision in an active
call (Alarm in conversation).
ALARM TIME SETTINGS
All settings can be found in the
>>>
Protection
>
Alarm Sensor
menu.
Alarm times are structured as follows.
Delay
This is the period of time that begins after the triggering event (Mandown, No movement, Escape).
If during this time, the triggering event is withdrawn for at least 2 seconds, the delay begins from
the start (in the case of the No movement alarm, and also with any key-press (as of Release
4.01). The delay can be set separately for each alarm type.
Pre-alarm
This is the period of time during which an alarm tone—where activated—is signalled on the DECT
phone before the alarm number is dialled. To deactivate the alarm tone (and therefore deactivate
the alarm), you must press the
Esc
softkey. During the pre-alarm, the display reading indicates
the amount of time remaining before the alarm number is dialled.
If during the pre-alarm the triggering event is withdrawn for at least 4 seconds in the case of
Mandown, and for at least 2 seconds in the case of the No movement alarm, the Delay starts
again.
The Escape alarm can only be withdrawn using the
Esc
softkey.
The time setting for the pre-alarm is made for all the alarm types jointly and can also be made
using vibrator call.
SETTINGS FOR OTHER ALARM PARAMETERS
Alarm number
If the SOS emergency number is predefined by the system, this menu item is not displayed.
If you always store the SOS emergency number preceded by the
R
key feature (inquiry / hold),
the emergency call can also be made during a call (depending on the system / and handset –
see above). To enter the
R
key feature, press the # -key three times. See also
“Editors” on page 23
.
Summary of Contents for 600
