Mitel 600 Series DECT Phone User Guide
12
POWER SUPPLY /POWER SUPPLY UNIT
The power supply unit is designed for 100V to 240V AC (50-60 Hz). It is supplied with four change
adapters enabling virtually worldwide use. Where necessary, connect the plug normally used in
your country to the power supply unit. There are two versions of the plug-in power supply unit
and they are connected slightly differently:
Version 1:
Press the pushbutton switch on the power supply unit and push out the existing plug
upwards. Insert the new plug from above into the power supply unit.
Version 2:
Remove any existing plug by pressing OPEN. Then insert the required new plug into
the power supply unit at a slight angle with the label TOP upwards. Press downwards until it
snaps into place.
MICROSD CARD
Mitel 620d, 622d, 630d (rel. 4.0), 632d, 650c:
Inside the DECT phone (underneath the battery) there is space for an optional microSD card.
This special microSD card stores the DECT phone’s log on data for your communication system,
all the main local device data, and the personal directory.
Storing data on the microSD card ensures that, if the device is defective, it is possible to take the
card out and use it in a replacement device so operations can be maintained in the shortest
possible time and without having to log on again.
Commercially available microSD cards cannot be used.
Take note of the User Guide supplied with the card and the more detailed descriptions available
on the website at http://www.mitel.com.
IMPORTANT INFORMATION ABOUT THE BATTERY
The devices are powered by a Li-ion battery. It is vital that you read the safety regulations before
using the battery for the first time. Keep these safety regulations and all instructions for use at
hand for future reference.
•
Dispose of used batteries according to the instructions in “Instructions for disposal” on
page 73.
Failure to heed any of the following precautions when using the battery can lead to overheating,
fire and danger of explosion.
•
CAUTION
: Risk of explosion if the battery is replaced by an incorrect type.
•
Never try to use the battery for the power supply of any device other than these handsets.
•
Never use or leave the battery close to a naked flame.
•
Never put the battery into a microwave oven, do not throw it into a fire and do not expose it
to high temperatures by any other means.
•
Never carry or store the battery together with electrically conducting objects (neck chains,
pencil leads, etc.)
•
Never attempt to open the battery, never modify it in any way or subject it to severe blows.
•
Never immerse the battery in fresh or salt water.
Summary of Contents for 600
