Mitel 600, User Manual

Page: 32 / 97

Mitel 600 Series DECT Phone User Guide
26
ACKNOWLEDGING AN APPOINTMENT OR REMINDER
You are notified of an appointment or reminder by the specified ringer and the LED flashing red
for approximately 45 seconds. The display shows the corresponding text. You can acknowledge
the notification by pressing the
Esc softkey.
ADJUSTING THE VOLUME OF THE EARPIECE DURING A CALL
Mite 610d, 612d
Press the +/- sidekeys to increase or reduce the volume of the current call. You can use the
navigation keys to increase (
) or decrease ( ) the volume. If these keys have been
programmed with functions different from the factory setting (Info, Profile), you need a long
key-press to access the volume control. You can then adjust the volume by briefly pressing the
key as required.
Mitel 620d / 622d / 630d / 632d / 650c
Press the upper or lower side-key to increase or reduce the volume of the call currently being
made. If the keys are programmed with functions, use a long key-press first. You can then adjust
the volume by briefly pressing the key as required.
Alternatively, you can use the navigation keys to increase ( ) or decrease ( ) the volume. If
these keys have been programmed with functions different from the factory setting (Info, Profile),
use a long key-press to access the volume control. You can then adjust the volume by briefly
pressing the key as required.
SWITCHING THE RINGER ON/OFF
Switch off: Press the key and hold for a moment. The symbol appears on the display.
Switch on: Press the key again and hold for a moment. The symbol disappears.
SWITCHING THE RINGER OFF AT CALL
If you want to switch off the ringer for a call that has just come in, press the C key or the
softkey. You can still accept the call as long as the caller has not hung up.
ILLUMINATION /DISPLAY DIMMING
The keypad and display are lit. Illumination is activated each time a key is pressed or a call is
made. The keypad and display remain lit for a user-definable amount of time.
To prevent the display illumination from switching itself off completely after that time, you can
activate display dimming. The display remains lit at a weak level for a maximum of 4 hours.
Activating this setting, however, reduces the battery life. You can make changes in the
>>> ->
Settings -> Illumination -> Keyboard / Display / Display dimming menu.
ACTIVATING THE DISPLAY ILLUMINATION
If the display illumination is switched off completely, you can activate it using one of the three
keys below the display (softkeys) without triggering the function stored under that key.
Note: To save the new setting (i.e., to store it as a menu entry) press the Ok softkey
when making the adjustment.