Mitel 600, User Manual

Page: 21 / 97

Installation
15
REGISTERING YOUR DECT PHONE (LOG IN)
Your DECT phone can be operated on up to 10 different communications systems. To do so, it
must be registered or, more precisely, logged in on each station.
Your system administrator will usually register the DECT phone for operation on the telephone
system.
Log-in must be enabled. Depending on the manufacturer of the system, the method can vary. In
most cases, the DECT phone’s IPEI is required (you can find the IPEI number by pressing the
softkey and selecting the System > Show IPEI option). To register the DECT phone on the
communication system, proceed as described in the System menu. This requires a PARK
number and an access code (AC = Authentication Code) from the system administrator.
REGISTRATION
A registration is stored in the device for each communications system on which the DECT phone
has been logged in. A registration entry also includes a system name (e.g. A, B, C,..). If you have
logged into the system with your DECT phone, this name appears on the display.
SUBSCRIPTION
After the DECT phone is subscribed in one or more communications systems, you can use the
device to make and receive calls. If the Auto search feature (see “System menu” on page 56) is
activated, the DECT phone (in idle mode) automatically selects the nearest accessible system
and logs in there. If you do not want to use the
Auto search feature, you can use the stored
registration entries to carry out a manual log-in on any system you want.