Mitel 600, User Manual

Page: 67 / 97

Device menu
61
Charger answer If this feature is active, the DECT phone automatically
answers a call if it is taken out of the charger cradle.
Auto.answer (call) With this feature activated, the DECT phone answers
a call automatically. Activate this feature only if your
work requires it, as it is then possible for the caller to
listen unnoticed.
For safety reasons, Auto answer is initiated using 3
attention tones, and its activation is signalled during
the call by the rapidly flashing green LED.
Press Change to activate or deactivate.
You can set the following options:
Time : Sets the amount of time after which Auto
answer should be activated: 0-20 seconds. Note : If
your device supports the Text messaging and/or
Paging features, ensure that Time is set to a value
greater than 3 seconds.
Mode : Allows you to select the auto answer mode
( Headset / Earpiece , Corded headse t, Bluetooth ,
Charger handsfree , Handsfree ).
Microphone : Lets you answer the call automatically
with or without activated microphone. You can also
activate the microphone after the call using the
softkey.
LED indication : Lets you activate or deactivate the
LED indication during the call.
Attention tone : Lets you activate or deactivate the
attention tone at the start of Auto answer.
Auto quick hook If this feature is activated, a long keypress on an
abbreviated dialling key dials the destination directly.
See
“Example: Personal phone book/Editor” on
page 22 and “Caller list, redial list (local list / system
list)” on page 28 .
A requirement is that the relevant phone book entry
comprises only one destination (private, business,
mobile, e-mail or fax); if not, the list of entries is
provided in call preparation.
Voice box
Handsfree You can select if the voice box should answer in the
hands-free mode.