Mitel 600, User Manual

Page: 31 / 97

Basic functions
25
BASIC FUNCTIONS
SWITCHING THE DECT PHONE ON/OFF
Switching the DECT phone on
Press and hold the End key ( ) until the display lights again. This can take up to 10 seconds.
Switching the DECT phone off
Press the End key ( ) and hold it down for a moment
or …
Press the End key ( ) briefly, select Switch off and press Ok .
The DECT phone switches off after a confirmation prompt.
KEY LOCK/PHONE LOCK
Switching on the key lock
Press the router key ( ) and hold for a moment. The key lock is activated and the Unlock
symbol ( ) appears in the display.
Switching the key lock off
Press the softkey and then press the router key ( ) within 3 seconds.
Releasing the phone lock
If you have locked your telephone to prevent unauthorized use (see “Security menu” on page 62 ),
you can release the lock again by pressing the Lock softkey ( ) and entering your PIN.
SWITCHING HANDS-FREE OPERATION ON/OFF
Press the loudspeaker key ( ) to switch hands-free operation on or off.
The Speaker symbol ( ) appears on the display if the hands-free operation feature is enabled.
If you make a call and place the DECT phone in the charger cradle, the hands-free
operation feature is automatically activated. Do not hold the DECT phone up to your ear
in hands-free mode or when the ringer is ringing as the volume can be very loud.
Note: If the DECT phone is switched off when placed in the charger cradle, it remains off
but continues to be charged. The LED flashes red/green alternately to indicate that the
DECT phone is charging.
For technical reasons the switched-off handset can switch itself on when placed in the
charger cradle if it is removed from the cradle again before the red / green flashing LED
is displayed.