Mitel 600, User Manual

Page: 12 / 97

Mitel 600 Series DECT Phone User Guide
6
- in direct sunlight
- next to other electrical devices
• Protect your DECT phone from moisture, dust, aggressive liquids and gases.
• Use only approved accessories.
• Use only the enclosed plug-in power supply unit (23-001061-00) on Mitel 610d, 620d and
630d devices (the plug-in power supply unit 23-001089-00 can be used as a spare part).
Only the plug-in power supply unit 23-001089-00 may be used with the Mitel 612d, 622d,
632d and 650c DECT phones.
• Use only use the standard battery (23-001080-00).
• Only clean your DECT phone with a slightly moist cloth.
• Do not use your DECT phone in explosive areas.
• Do not use Mitel 610d, 612d, 620d, 622d or 650c DECT phones in wet rooms (e.g.
bathrooms).
• Do not hold the DECT phone up to your ear in hands-free mode or when the ringer is ringing
as the volume can be very loud.
• This product’s earcap region (at the front) and the loudspeaker region (at the rear) are slightly
magnetic and may pick up metallic objects, such as staples or pins. Check both regions for
metallic objects before use.
• Never
• open the charger cradle or the DECT phone (except for the battery compartment cover)
yourself!
• touch the plug contacts with pointed metallic objects!
• carry the charger cradle by the connection cable!
COMMUNICATIONS REGULATION INFORMATION (MITEL 610D, 612D,
620D, 622D)
FCC NOTICES (U.S. ONLY)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Modifications not expressly approved by this company could void the user's authority to operate
the equipment.
Note: Before using the DECT phone, users of hearing aids should note that such aids
can receive radio signals, which, if powerful enough, may cause an unpleasant hum.