Mitel 600, User Manual

Page: 43 / 97

Telephoning
37
Correcting your input during predial
• To delete individual digits, briefly press the C key.
• To delete the entire phone number, press and hold the C key.
Toggling between digit and letter input (where supported by the system)
Press the * key several times.
• Digit input: display reads 123
• Letter input – upper case, then lower case: display reads Aa
• Letter input – upper case: display reads A
• Letter input – lower case: display reads a
Setting the character set
During character input you can change the character set by pressing >>> . The selected setting
is then adopted as the default (inputs begin with either digits or letters). This setting can be reset
temporarily during the input by pressing the
* key once again.
CALLING FROM THE REDIAL LIST (LOCAL / SYSTEM)
Check to see which list (local / PBX) has been set on the display (see “List access” on page 60 ).
The local list contains the phone numbers of the last 30 phone numbers dialled (or 20 entries on
the Mitel 610d and 612d). If you are using the system (PBX) redial list, the last 30 entries or 50
entries are displayed, depending on the system equipment.
Press >>> and select phone number from one of the following lists:
• Caller list
• Redial list
• Personal directory, Central directory
Available only on Mitel 622d, 632d, 650c with set icon menu structure
If you enter the start of a number and press the softkey, the DECT phone
searches the personal directory for all names and numbers that start with this
number sequence. Select the required entry and press
Ok .
Press the Redial softkey.
Use the Navigation keys to select an entry.
Press the Call key.
The selected entry is called.
Note: You can also access the Redial feature by pressing and holding down the Call
key .