![background image](http://html1.mh-extra.com/html/mircom/dtc-300a/dtc-300a_installation-and-operation-manual_1805705024.webp)
24
Keypad Configuration & Operation
9.11 Dialer Config (Command-Menu)
Press the Menu key on the keypad of the DTC-300A board to configure the DTC-300A. The
following illustration shows the dialer configuration menu. Each item in this menu is described
below in detail. Use the Up and Down keys to scroll through the menu and press the Enter key
to make a selection. To exit from the menu, select the Exit menu option and then press either
the Enter or Cancel key. Once a menu feature has been selected, use the Left and Right keys
to change values or the numerical keys to enter account numbers.
9.11.1 Account Info Menu
Command Menu/Dialer Config/Account Info
1.Account# 1 Identification
123456->Default
Use this function to set the Account ID for
the monitoring station to which the dialer
reports events. The maximum number of
digits allowed is six. For contact ID, only
the first four digits are used; the last two
are truncated.
If you are using the Contact ID protocol,
the allowed digits for the account ID are
simple digits 0 to 9 and hexadecimal
digits A to F. The SIA protocol only allows
digits 0 to 9.
To enter hexadecimal digits, press the
INFO button. The letter “A” will appear. To
scroll through the rest of the letters, press
INFO repeatedly. Press # key to move the
cursor to the right or press * key to move
it to the left.
- Dialer Config -
1 Account Info
2 Telephone Line
3 Report Options
4 Time Parameter
5 Enable/Disable
6 Ring Detection
1 A c c o u n t # 1 I D
2 A c c o u n t # 1 T e l
3 A c c n t # 1 F o r m a t
4 A c c o u n t # 2 I D
- A c c o u n t I n f o -
5 A c c o u n t # 2 T e l
6 A c c n t # 2 F o r m a t
Account#1 ID:
123456
Summary of Contents for DTC-300A
Page 2: ......