![background image](http://html1.mh-extra.com/html/mircom/dtc-300a/dtc-300a_installation-and-operation-manual_1805705016.webp)
16
Configuration Set-up
8.3
Configuration via Modem and Computer (Remote)
1. Set-up the modem connection on the computer. Make sure the phone line is working
properly.
2. Place a jumper at JW2 on the DTC-300A board to allow the configuration (a trouble is
generated and reported to the receiver DACR).
3. Start the Mircom Software MSW-012 on the computer to configure the DTC-300A.
Follow the instructions of MSW-012 menu to complete the configuration of the DTC-
300A.
4. Remove jumper on JW2 after configuration is finished, otherwise a trouble will occur.
Summary of Contents for DTC-300A
Page 2: ......