23
Keypad Configuration & Operation
9.9
Set Password (Command-Menu)
9.10 Default Config (Command-Menu)
Command Menu/Set Password
If the passcode does not match, the
following message appears and the
system exit to the main menu
If the passcode is OK the following
message appears and exits to the main
menu
1111 -> Default
Use this function to change
the passcode. The minimum
number of digits is 4 and the
maximum number is 10.
ONLY numeric digits are
allowed.
Command Menu/Default Config
Press “UP” and “DOWN” to select
between Y/N. if “ENTER” is pressed the
default configuration is restored.
Use this function to load the default configuration in the panel.
Warning:
By loading default configuration all the previously
programmed configuration is lost permanently.
E n t e r n e w p a s s c o d e
[ ]
R e - e n t e r p a s s c o d e
[ ]
i n v a l i d p a s s c o d e
P a s s c o d e u p d a t e d
L o a d t h e d e f a u l t
s e t t i n g s ? Y
D e f a u l t s e t t i n g s
h a v e b e e n l o a d e d
Summary of Contents for DTC-300A
Page 2: ......