22
Keypad Configuration & Operation
9.7
Version Info
The first line shows the model number and panel type and the second line shows the software
version number. The version of the software is read as Major.Minor.Revision.
9.8
Set Time (Command-Menu)
This specifies the configuration tool version. It will display
0.0.0.0 if no PC configurator has been used.
Command Menu/Set Time
1. Daylight saving time
[X] DISABLE ->Default
[ ] ENABLE
Use this function to enable
daylight savings time.
Command Menu/Time Clock
2. Set time and date
Default
00:00 MON 2000-01-01
Use this function to set the
time and date. Use the
“LEFT” and “RIGHT” keys to
move the cursor to the
desired location in the display
and use the “UP” and
“DOWN” keys to increase or
decrease the values. Press
the “ENTER” key to accept
the changes and the
“CANCEL” key to ignore the
changes.
Note:
time is in 24hr
format
Command Menu/Time Clock
3. Compensation
Once the compensation value is
entered the display will be:
Compensation value can
range from -15 to +15
seconds.
Use the up down arrow keys to
select daily compensation value
and press ENTER. For a fast
clock adjust negatively. For a
slow clock adjust positively. For
example: for a clock which runs
5 minutes a month (based on 30
days) fast select -10 seconds.
C f g . T o o l S / W V e r s . :
V e r s i o n : x . x . x . x
S/DTC-300A
Version 1.0.1
1 Daylight Save
2 Time Clock
3 Compensation
D a y l i g h t S a v i n g
[ X ] D I S A B L E
H H : M M W K D Y Y Y Y - M M - D D
0 0 : 0 0 M O N 2 0 0 0 - 0 1 - 0 1
D a i l y C o m p e n s a t i o n :
0
D a i l y C o m p e n s a t i o n :
P a n e l C o n f i g U p d a t e d
Summary of Contents for DTC-300A
Page 2: ......